Order Products : sales@su-jiao.com
Sarlink® TPE EE-1230N
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Sarlink® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GdyhbQ_Sarlink-TPE-EE-1230N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sarlink®TPE EE-1230N is a thermoplastic elastomer (TPE) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is: extrusion. Sarlink®The typical application field of TPE EE-1230N is: automobile industry |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 1 | ASTM D2240 | ||
| Shore A, 1 second, injection molding | 33 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding | 30 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2 | ASTM D412 | ||
| Transverse flow : 100% strain | 0.317 | MPa | ASTM D412 |
| Flow : 100% strain | 0.586 | MPa | ASTM D412 |
| Tensile Strength 3 | ASTM D412 | ||
| Transverse flow : Fracture | 4.73 | MPa | ASTM D412 |
| Flow : Fracture | 2.63 | MPa | ASTM D412 |
| Tensile Elongation 4 | ASTM D412 | ||
| Transverse flow : Fracture | 950 | % | ASTM D412 |
| Flow : Fracture | 740 | % | ASTM D412 |
| Tear Strength - Across Flow 5 | 16.8 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 199 - 210 | °C | |
| Middle Temperature | 204 - 216 | °C | |
| Front Temperature | 210 - 221 | °C | |
| Nozzle Temperature | 216 - 227 | °C | |
| Processing (Melt) Temp | 216 - 227 | °C | |
| Mold Temperature | 35.0 - 65.6 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 - 0.862 | MPa | |
| Screw Speed | 50 - 120 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| 无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 193 - 204 | °C | |
| Cylinder Zone 2 Temp. | 199 - 210 | °C | |
| Cylinder Zone 3 Temp. | 204 - 216 | °C | |
| Cylinder Zone 5 Temp. | 210 - 221 | °C | |
| Die Temperature | 216 - 227 | °C |
| Extrusion instructions |
|---|
| 螺杆转速30 - 100 rpm |
| Note Message | |
|---|---|
| 1 . | Aging 48 hr |
| 2 . | Mouth die C, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | Mouth die C, 510mm/min |
| 5 . | C mold, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMSTER PF300J50 | Polyram Ram-On Industries | PBT | RAMSTER |
| Melos™ FM 1639 | Melos GmbH | TPO (POE) | Melos™ |
| Sindustris ABS LSG286 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| VESTAMID® L LX9008 | Evonik Industries AG | Nylon 12 | VESTAMID® L |
| ASTALOY™ PC/ABS M130S | Marplex Australia Pty. Ltd. | PC+ABS | ASTALOY™ |
