Order Products : sales@su-jiao.com
Aplax P1412GN
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Ginar Technology Co., LTD. |
| Trademark: | Aplax |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GdblIP_Aplax-P1412GN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Aplax P1412GN is a 20% Mica Filled PP product for extrusion and injection moulding in natural colour |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (1.60 mm) | 0.90 - 1.2 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 41.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 25 | % | ISO 527-2 |
| Flexural Modulus | 3380 | MPa | ISO 178 |
| Flexural Stress | 65.0 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 140 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 125 | °C | ASTM D648, ISO 75-2/A |
| Melting Temperature | > 165 | °C | DSC |
| CLTE - Flow | 1.0E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Additional Information |
|---|
| Notched Izod Impact Strength, ISO 180/1, notch 0.25in: 53 kg cm/cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 - 220 | °C | |
| Middle Temperature | 170 - 220 | °C | |
| Front Temperature | 170 - 220 | °C | |
| Nozzle Temperature | 210 - 220 | °C | |
| Processing (Melt) Temp | 180 - 220 | °C | |
| Injection Pressure | 50.0 - 120 | MPa | |
| Holding Pressure | 30.0 - 80.0 | MPa | |
| Back Pressure | 0.00 - 0.300 | MPa | |
| Screw Speed | 60 - 120 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vinnolit® P 70 PS | Vinnolit GmbH & Co. KG | PVC Homopolymer | Vinnolit® |
| 4MID® 9B22150 GF50 | 4Plas | Nylon 6 | 4MID® |
| apilon 52bio® TB 65A | API SpA | TPU-Polyether | apilon 52bio® |
| Chemlon® MDM54 | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
| Hostaform® MT8F01 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
