Order Products : sales@su-jiao.com

Arak HDPE I2

Category:	HDPE , High Density Polyethylene
Manufacturer:	Shazand (Arak) Petrochemical Corporation
Trademark:	Arak HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GcqnhW_Arak-HDPE-I2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
I2 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications. Characteristics: Easy flowing. Virtually free from distortion. Typical applications are: Lightweight house-hold less hard and rigid than I1. * I2 is suitable for food contact.

Message

I2 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications.
Characteristics:

Easy flowing.

Virtually free from distortion.

Typical applications are:

Lightweight house-hold less hard and rigid than I1.

* I2 is suitable for food contact.

General Information
Features	Food Contact Acceptable Good Dimensional Stability Good Flow
Uses	Household Goods
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.950	g/cm³	DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	28	g/10 min	DIN 53735

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength	> 2.5	kJ/m²	DIN 53453

Optical	Nominal Value	Unit	Test Method
Yellowness Index	< 4.0	YI	DIN 6167

Resin Grade	Manufacturer	Category	Trademark
CoREZYN® COR30-DA-210	Interplastic Corporation	Polyester, TS	CoREZYN®
Exelene® HDPE 8000UV	Montachem International, Inc.	HDPE	Exelene® HDPE
LUBAN™ 1101 N	Oman Oil Refineries & Petroleum Indistries Co. (Orpic)	PP Homopolymer	LUBAN™
Pebax® MV 1074 SN 01	Arkema	PEBA-Ether	Pebax®
SD POLYCA™ SI6011W-F10	Sumika Styron Polycarbonate Limited	PC	SD POLYCA™