TECHNYL® A 218 S30 NATURAL Datasheet,Nylon 66,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® A 218 S30 Natural is a Polyamide PA66, reinforced with 40% of glass spheres, Heat stabilised, for injection moulding. This grade offers an excellent combination between thermal and mechanical properties.

General Information
Filler / Reinforcement	Glass beads, 30% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Low warpage Good demoulding performance
Uses	Application in Automobile Field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA66-GB30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.35	--	g/cm³	ISO 1183/A
Water Absorption				ISO 62
23°C, 24 hr	0.75	--	%	ISO 62
Equilibrium, 23°C, 50% RH	1.6	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	5000	2500	MPa	ISO 527-2/1A
Tensile Stress				ISO 527-2/1A
Yield, 23°C	80.0	--	MPa	ISO 527-2/1A
Fracture, 23°C	80.0	60.0	MPa	ISO 527-2/1A
Tensile Strain				ISO 527-2
Yield, 23°C	3.6	--	%	ISO 527-2
Fracture, 23°C	7.0	10	%	ISO 527-2
Flexural Modulus (23°C)	3850	1900	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	3.5	5.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	30 kJ/m²	No Break		ISO 179/1eU
Notched Izod Impact (23°C)	2.5	5.0	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	95.0	--	°C	ISO 75-2/Af
Melting Temperature	263	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	5.0E+14	--	ohms	IEC 60093
Volume Resistivity	5.0E+14	--	ohms·cm	IEC 60093
Dielectric Strength (2.00 mm)	30	26	kV/mm	IEC 60243-1
Dissipation Factor	0.020	0.11		IEC 60250
Comparative Tracking Index (Solution A)	450	--	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Oxygen Index	25	--	%	ISO 4589-2

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	270 - 280	°C
Middle Temperature	275 - 285	°C
Front Temperature	280 - 290	°C
Mold Temperature	70 - 100	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GbDaUG_TECHNYLA218S30NATURAL.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Terralene® LL 1101	FKuR Kunststoff GmbH	HDPE+LLDPE	Terralene®
Topilene® R530A	Hyosung Corporation	PP Homopolymer	Topilene®
Ebalta MG 815-1 / MG 815	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
Karina MBU BLACK 48/ 1-IE	Karina Ind. e Com. de Plásticos Ltda	EVA	Karina
Plenco 07487 (Transfer)	Plastics Engineering Co.	Phenolic	Plenco