Order Products : sales@su-jiao.com
Geon™ 170 Series L100UF
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 170 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GaRaOL_Geon-170-Series-L100UF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon® Ultrafine 170-L100UF is a medium molecular weight, ultrafine particle size homopolymer dispersion resin. With the very fine particle size, it provides excellent casting characteristics for thin film applications, and ability to produce even thinner gauge coatings. The excellent dispersibility provides good product throughput during the organosol manufacturing process with the sand milling process reduction or elimination. A medium molecular weight resin provides a good balance of fused film properties and processing temperatures. The low residual emulsifier level provides good end product performance in the areas of clarity, moisture blush resistance, low taste and odor. This resin is accepted by FDA for use under 21CFR175.300 (food contact application). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 70.0 | ||
| Intrinsic Viscosity | 1.0 | ASTM D1243-60-A | |
| Humidity- Karl Fisher 2 | 0.070 | % | Internal method |
| Volume density | 272 | g/l | |
| Relative Viscosity 3 | 2.37 | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| One Day Viscosity @ 30 rpm 4 | 300 | mPa·s | Internal method |
| One Day Viscosity @ 6 rpm 5 | 525 | mPa·s | Internal method |
| One Hour Viscosity @ 30 rpm 6 | 200 | mPa·s | Internal method |
| One Hour Viscosity @ 6 rpm 7 | 300 | mPa·s | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Clean Point - Grind 8 | 5.50 | Hegman | Internal method |
| North fineness- Grind 9 | 6.00 | Hegman | Internal method |
| Residual Vinyl Chloride Monomer 10 | ppm | Internal method | |
| Methanol extractable 11 | 1.3 | % | Internal method |
| polymerization process | Dispersion | ||
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® STP 1434 (formulation): 100phr Geon® L100UF, 55phr Aromatic100, 20phr Drapex 334-F, 5phr ESO, and 3phr Therm-Chek SP 120 LOHF |
| Note Message | |
|---|---|
| 1 . | Interrelationship |
| 2 . | Karl Fisher-Geon® 683c |
| 3 . | 1% Cyclohexanone |
| 4 . | FF，ALTC-29 |
| 5 . | 95 psi，Geon® 1010 |
| 6 . | One day, V12,Geon®1010 |
| 7 . | Initial, V12,Geon®1010 |
| 8 . | Geon® STP 1434 (with provided formulation) |
| 9 . | Geon® 390 |
| 10 . | Geon® STP 1005 |
| 11 . | Geon® 894 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® MR409 22H-NBK4 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| Xuchuan XCW-8572H | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| CP PRYME® Polycarbonate PC100RUV | Chase Plastics Services Inc. | PC | CP PRYME® Polycarbonate |
| Genestar™ N1001A-M41 | Kuraray Co., Ltd. | Nylon 9T | Genestar™ |
| Elastron® G G100.A70.B | Elastron USA, Inc. | SEBS | Elastron® G |
