Order Products : sales@su-jiao.com
Andur 9-3 APLF/Curene® 442
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GaNKlB_Andur-9-3-APLF-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 9-3 APLF is a polyester based liquid, toluene diisocyanate terminated prepolymer containing 0.1% or less free TDI monomer. An elastomer with a hardness of 92 to 94 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442, other diamines or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 93 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 9.83 | MPa | ASTM D412 |
| 300% strain | 17.6 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 61.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 530 | % | ASTM D412 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 5.0 - 6.0 | min | |
| Demold Time (100°C) | 20 - 30 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 92 to 94Die C Tear, ASTM D1004: 500 pliAverage Split Tear, ASTM D1938: 315 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 9-3 APLF: 150-170°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Retpol® 3013 HS UV3 | PolyPacific Pty. Ltd. | PP, Unspecified | Retpol® |
| Skyrol® SG00 | SKC Inc. | PET | Skyrol® |
| SUMIKASUPER® LCP E6109F | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| Taipol 6150 | TSRC Corporation | SBS | Taipol |
| ULTEM™ DT1810EV resin | SABIC Innovative Plastics | PEI | ULTEM™ |
