Order Products : sales@su-jiao.com
AZR-Ecoplast 143 HDPE black 0.5
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | UrbanPlast SIA |
| Trademark: | AZR-Ecoplast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GZpRBq_AZR-Ecoplast-143-HDPE-black-0-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AZR Ecoplast 143 HDPE black 0.5 is high impact resistance in - extruder made thermoplastic polyethylene with a low temperature plastic composite profile for injection molding. AZR Ecoplast 143 HDPE black 0.5 is controlled technology extra high impact resistance thermoplastic polyethylene with rheological properties even at low temperatures. Applications: AZR Ecoplast 143 HDPE black 0.5 is designed to offer excellent stiffness, low warping, good/acceptable toughness, plasticity and good moldability (extrudability). This resin is ideally suited for injection molded crates, cases, trays, tote, containers, bins and other objects requiring high rigidity. Food Contact: AZR Ecoplast 143 HDPE black 0.5 complies with EU directive 10/2011. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Apparent Density | 0.53 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.52 to 0.59 | g/10 min | |
| 190°C/5.0 kg | 1.5 to 1.6 | g/10 min | |
| Humidity - External 1 | 0.20 to 0.40 | % | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Impact Strength | 200 | J/m | ISO 148 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Odor - 15 estimators | 1.00 | points | EN 13752 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 97 | ||
| Shore D | 65 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | > 1690 | MPa | ISO 527-2 |
| Tensile Stress (Break) | > 27.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 46 | % | ISO 527-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 190 | °C |
| Note Message | |
|---|---|
| 1 . | Nexis fiber method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxiglas® MG515 | Maxiglas Corporation | Acrylic (PMMA) | Maxiglas® |
| SABIC® HDPE B6246 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| BP RPP 2010 T NAT | Buckeye Polymers, Inc. | PP, Unspecified | BP |
| Cheng Yu A708G3 | Cheng Yu Plastic Company Limited | SAN | Cheng Yu |
| Paryls® PSU F3050 | Youju New Materials Co., Ltd. | PSU | Paryls® |
