Cardia Biohybrid™ H-M01

Category: TPS+PE , Thermoplastic Starch + PE
Manufacturer: Cardia Bioplastics™
Trademark: Cardia Biohybrid™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: GZcTIP_Cardia-Biohybrid-H-M01.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Cardia Biohybrid™ H-M01 is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good impact resistance and toughness. The resin is based on corn starch which is a renewable material.

  • A biohybrid resin offering a significant reduction in carbon footprint (compared to polyolefins PE/PP)
  • An effective contribution to sustainability where biodegradability/compostability is not required
  • Designed for thin and thick gauge rigid moulding and extrusion applications.

Cardia Biohybrid™ H-M01 is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a wide range of products manufactured by injection moulding or extrusion processes. Due to its content of polypropylene the material is not a fully biodegradable polymer and it is not intended for ultimate disposal in commercial composting facilities. If biodegradability or compostability is required, use of Cardia Compostable B-M or TBM resin is recommended.

Application Examples
  • Injection moulded products such as cutlery, toothbrushes, combs, shavers, golf-tees, etc.
  • Stakes and pegs
  • Horticultural products such as flower pots and stakes
  • Injection moulded containers, caps and closures
  • Disposable plates and produce trays
General Information
Features
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Toughness
  • High Strength
  • Renewable Resource Content
Uses
  • Caps
  • Closures
  • Containers
  • Disposable Tableware
  • Lawn and Garden Equipment
  • Personal Care
  • Support Trays
  • Table Products
  • Toothbrush Handles
Agency Ratings
  • EU 2002/72/EC
Processing Method
  • Extrusion
  • Injection Molding
PhysicalNominal ValueUnitTest Method
Density 1.07g/cm³ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)3.1 to 4.7g/10 minASTM D1238
Molding Shrinkage - Flow 1.0%
MechanicalNominal ValueUnitTest Method
Tensile Strength (Break)> 15.0MPaASTM D638
Tensile Elongation (Break)> 16%ASTM D638
ImpactNominal ValueUnitTest Method
Notched Izod Impact 9.7J/mASTM D256
ThermalNominal ValueUnitTest Method
Peak Melting Temperature 150 to 165°CASTM D3418
Additional InformationNominal ValueUnit
Biobased Content - Starch 50%
Resin Grade Manufacturer Category Trademark
POLYSTONE® M black EL Röchling Engineering Plastics SE & Co. KG UHMWPE POLYSTONE®
Moplen HP524J PolyMirae PP Homopolymer Moplen
ACCUTECH™ HP0336C30L1 ACLO Compounders Inc. PP Homopolymer ACCUTECH™
Halene H Y5401 Haldia Petrochemicals Ltd. HDPE Halene H
Hapweld™ 390 Hapco Inc. TP, Unspecified Hapweld™