Order Products : sales@su-jiao.com
Koylene CP MI3535
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Koylene CP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GZ0gyU_Koylene-CP-MI3535.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Koylene-CP grade MI3535 is a polypropylene impact copolymer, manufactured by copolymerising propylene with ethylene. The ethylene - propylene elastomeric phase in the PP impact copolymer improves the impact strength of the products which is retained even at sub-zero temperatures. Koylene-CP grade MI3535 is specially formulated for high speed extrusion compression moulding process. The grade possesses good toughness and the articles moulded can withstand a continuous service temperature of up to 90oC. FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on "Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water". The grade also complies with FDA regulation: CFR TITLE 21 - 177.1520, on olefin polymers. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 30.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, 3.20 mm, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus 3(3.20 mm, Injection Molded) | 1300 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm, Injection Molded) | 120 | J/m | ASTM D256 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 220 | °C | |
| Cylinder Zone 2 Temp. | 240 | °C | |
| Cylinder Zone 3 Temp. | 250 | °C | |
| Cylinder Zone 4 Temp. | 250 | °C |
| Extrusion instructions |
|---|
| Nozzle Temperature: 250°CMold Temperature: as per process requirements |
| Note Message | |
|---|---|
| 1 . | Type 1 |
| 2 . | Type 1 |
| 3 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 90-A481R-85-NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Diakon® CMG314N | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| Hapflex™ 668-3 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| HiFill FR® PA6/6 CF15 FR BK | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
| Idemitsu PS SEHI-110 | Idemitsu PS | PS (HIPS) | Idemitsu PS |
