Order Products : sales@su-jiao.com
HANWHA LDPE 950
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GXhYAo_HANWHA-LDPE-950.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HANWHA LDPE 950 is manufactured by autoclave process and designed for variety of extrusion coating application such as flexible packaging, paper coating etc.. LDPE 950 is well known for its excellent draw-down characteristics and high quality assurance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.83 | MPa | |
| Break | 9.81 | MPa | |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission | 17 | g/m²/24 hr | ASTM F1249 |
| Heat Seal Strength 1 | 0.25 | MPa |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Allowable Coating Speed 2(305°C) | 6.7 | m/sec |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Neck-in 3(305°C) | 35.0 | mm |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Melting Temperature | 105 | °C | ASTM D3417 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 200 to 320 | °C | |
| Cylinder Zone 3 Temp. | 200 to 320 | °C | |
| Cylinder Zone 5 Temp. | 200 to 320 | °C | |
| Adapter Temperature | 320 | °C | |
| Die Temperature | 320 | °C |
| Note Message | |
|---|---|
| 1 . | PET (12µm) / PRINT / LDPE (20µm) / AI Foil (7µm) / LDPE 950 (20µm)Time / Temperature / Pressure of Sealing : 1.0 sec./170°C/2kg/cm^2 |
| 2 . | Melt Temperature : 305°C, Line Speed : 100m/min., Output: 80kg/hr |
| 3 . | Melt Temperature : 305°C, Line Speed : 100m/min., Output: 80kg/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom SC5-4530U | Spartech Polycom | PP Copolymer | Spartech |
| UMG ABS® EX120 | UMG ABS, Ltd. | ABS | UMG ABS® |
| Grivory® GM-4H | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| MAJORIS DG507X - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| TECHNO ABS 830 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
