Order Products : sales@su-jiao.com
CERTENE™ LLBD-2024G
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GXfsem_CERTENE-LLBD-2024G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLBD-2024G is a certified prime Butene-ethylene copolymer, designed for COMPOUNDING applications requiring good melt viscosity and good melt flow to assure thorough mixing and dispersion of components. LLBD-2024G features medium melt flow, easy processability, wide process window, and improved dispersion capability. LLBD-2024G applications include distributive melt mixing of additives and color concentrates, Master-Batches, and tailoring compounds to property requirements of a given end-use. LLBD-2024G is supplied in granular form. Suggested processing temperature is 180° to 220°C. LLBD-2024G complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 3.00mm, 100% Igepal, molded, F50) | 150 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 12.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 300 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 448 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 71.5 | kJ/m² | ASTM D1822 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C |
| Note Message | |
|---|---|
| 1 . | Non-slit strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200.5A HS | RTP Company | Nylon 6 | RTP |
| TOYOBO Urethane A1071D | TOYOBO America, Inc. | PUR-Butyl | TOYOBO Urethane |
| Xuchuan XCS-15HN | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| DI-COAT E-4599 | Hapco Inc. | TP, Unspecified | DI-COAT |
| POCAN® B 3215 XF 000000 | LANXESS Asia/Pacific | PBT | POCAN® |
