Order Products : sales@su-jiao.com
Evolue™ SP2040
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | Evolue™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GWf1NL_Evolue-SP2040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Evolue™ SP2040 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP2040 include coating applications, film and wrap. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.8 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 55 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | > 19.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | > 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 220 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 101 | °C | ISO 306 |
| Melting Temperature | 116 | °C | ISO 11357-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XAREC™ WA 210 | Idemitsu Kosan Co., Ltd. | SPS | XAREC™ |
| DIC.PPS FZ-2100 | DIC Corporation | PPS | DIC.PPS |
| Forprene® 6NM901A70 | SO.F.TER. SPA | TPV | Forprene® |
| Hylon® N1243L | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| ALCOM® PA66 910/1.3 CF/GF30 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
