Order Products : sales@su-jiao.com
NYCOA Polyamide 7551 Nat
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GVGsrB_NYCOA-Polyamide-7551-Nat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 7551 Nat is a heat stabilized Nylon 12 alloy that offers outstanding toughness, flexibility, and impact strength. It has been specially formulated to give excellent resistance to zinc chloride and other automotive fluids. The material offers high resistance to moisture absorption. NYCOA 7551 Nat is suitable for both injection molding and extrusion. It exhibits outstanding processability, chemical resistance, good heat stability and an excellent balance of mechanical properties. This grade is available with custom additive packages: UV stabilizer, flame retardant and/or custom colors. Typical applications include high performance automotive tubing; air brakes, fuel lines and lube lines and profile extrusion. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.34 | % | ASTM D570 |
| Saturation | 1.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 44.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D638 |
| Flexural Modulus 3 | 437 | MPa | ASTM D790 |
| Flexural Strength 4 | 17.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | No fracture 850 J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 174 - 206 | °C |
| Additional Information |
|---|
| The value listed as Melting Point, was tested in accordance with ASTM D789.Tensile Elongation at Break, ASTM D638, 2 in/min: 600+% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP UP4G402-Natural/PPH2LTF4-Natural | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| Network Polymers PP PPH 30 1200 TF40 | Network Polymers, Inc. | PP Homopolymer | Network Polymers PP |
| ELASTOSIL® R plus 4020/40 | Wacker Chemie AG | Silicone | ELASTOSIL® R plus |
| Pearlthane® ECO 12T95 | Lubrizol Advanced Materials, Inc. | TPU, Unspecified | Pearlthane® ECO |
| Domamid XS™ 5750R30H2 | Technical Polymers, LLC | Nylon 66 Alloy | Domamid XS™ |
