Order Products : sales@su-jiao.com
Deltron 3366
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Deltron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GUmPYE_Deltron3366.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Deltron 3366 is a polyphenylene sulfide (PPS) material,. This product is available in the Asia-Pacific region and is processed by injection molding. The main features of the Deltron 3366 are:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | |
| Water Absorption (Equilibrium) | 0.020 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 150 | MPa | |
| Tensile Elongation (Break) | 2.5 | % | |
| Flexural Modulus | 17000 | MPa | |
| Flexural Strength | 220 | MPa | |
| Compressive Strength | 110 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 10.0 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 267 | °C | |
| Melting Temperature | 288 | °C | |
| CLTE - Flow | 1.8E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | 8.0E+15 | ohms | |
| Volume Resistivity | 5.0E+16 | ohms·cm | |
| Dielectric Strength | 15 | kV/mm | |
| Dielectric Constant (1 MHz) | 5.00 |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Flame Rating (2.0 mm) | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 140 | °C | |
| Drying Time | 4.0 - 8.0 | hr | |
| Rear Temperature | 240 - 260 | °C | |
| Middle Temperature | 290 - 310 | °C | |
| Front Temperature | 300 - 330 | °C | |
| Mold Temperature | 100 - 140 | °C | |
| Injection Rate | Moderate | ||
| Back Pressure | 60.0 - 80.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMOFIN PPC371B50 | Polyram Ram-On Industries | PP Copolymer | RAMOFIN |
| TITANEX® HC2581B | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANEX® |
| TPV Elastoprene® N73A-S | ELASTORSA Elastomeros Riojanos S.A. | PP+EPDM | TPV Elastoprene® |
| CarmelStat™ CS 2015 | Carmel Olefins Ltd. | PP, Unspecified | CarmelStat™ |
| Diaterm® A27 GF20 | DTR S.r.l. (Develop Thermoplastic Resins) | Nylon 6 | Diaterm® |
