Order Products : sales@su-jiao.com
Generic PPA - Aramid Fiber
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GSBuHU_Generic-PPA---Aramid-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPA - Aramid Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 - 1.40 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.067 - 1.2 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.20 - 0.42 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 3450 - 6030 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 65.9 - 147 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.0 - 3.3 | % | ASTM D638 |
| Flexural Modulus (23°C) | 3450 - 6550 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 123 - 244 | MPa | ASTM D790 |
| Coefficient of Friction | 0.13 - 0.25 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 - 66 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 260 - 270 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 118 - 282 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 10 - 1.0E+15 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 135 | °C | |
| Drying Time | 4.0 - 16 | hr | |
| Rear Temperature | 324 - 330 | °C | |
| Middle Temperature | 324 - 333 | °C | |
| Front Temperature | 324 - 338 | °C | |
| Processing (Melt) Temp | 313 - 330 | °C | |
| Mold Temperature | 135 - 149 | °C | |
| Injection Pressure | 86.2 - 103 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPA - Aramid FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toler PS PS8000 | Toler Chemical, Inc | PS (GPPS) | Toler PS |
| TOYOBO Urethane E1095A | TOYOBO America, Inc. | PUR-Butyl | TOYOBO Urethane |
| Ultramid® B3S FC R01 | BASF Corporation | Nylon 6 | Ultramid® |
| ColorFast® PCT1000 | LTL Color Compounders, Inc. | PC+PET | ColorFast® |
| Fluoroplex GF 515 - GMA | UNIFLON | PTFE | Fluoroplex |
