| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | A. Schulman Europe |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GQbXce_ICORENEN2308.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
ICORENE® N2308 is a medium density polyethylene produced by slurry loop low pressure process with hexene as co-monomer. It contains antioxidant stabilizers and has excellent mechanical properties. It can be used alone, or blended or co-extruded in a wide variety of blown film applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.934 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.15 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ISO 527-3 | ||
| Yield, 0.0200mm | 19.0 | MPa | ISO 527-3 |
| Fracture, 0.0200mm | 52.0 | MPa | ISO 527-3 |
| Tensile Strain 2(fracture, 0.0200mm) | 500 | % | ISO 527-3 |
| Flexural Modulus 3 | 620 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 118 | °C | ISO 306 4 |
| Peak Melting Temperature | 125 | °C | ISO 11357-1, -2, -3 |
| Note Message | |
|---|---|
| 1 . | Obtained on cast film |
| 2 . | Obtained on cast film |
| 3 . | 0.25% Max |
| 4 . | 速率 A (50°C/h), 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® F7875 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Raditer® B RVA300 | Radici Plastics | PBT | Raditer® |
| BLUESTAR庐 PBT 101G30 | Nantong Zhonglan Engineering Plastics Co., Ltd. | PBT | BLUESTAR® |
| Chemraz 656 | Greene, Tweed & Co. | Perfluoroelastomer | Chemraz |
| Geon™ Vinyl Wire & Cable WR7426L | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Wire & Cable |