Order Products : sales@su-jiao.com

KPOL-HDPE HD K-I 5.0/962

Category:	HDPE , High Density Polyethylene
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GQIy4e_KPOL-HDPE-HD-K-I-5-0-962.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

High Density Polyethylene Injection molding grade

Characteristics

The KPOL - HD K-I 5.0/962 ; Is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. Good processability and low warpage.

They are tailored with narrow molecular weight distribution (MWD) result for good impact strength.

Applications

Bins, Boxes for fruits and vegetables, Boxes for fish and General purpose boxes, crates and safety helmets.

Caps and Closures and General purpose boxes.

The KPOL® resin meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Additive	Antioxidant Unspecified Stabilizer
Features	Antioxidant Food Contact Acceptable Good Impact Resistance Good Processability High Density High Stiffness Low Warpage Narrow Molecular Weight Distribution
Uses	Caps Closures Containers Food Containers Safety Helmets
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.962	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	5.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	60		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	27.0	MPa
Break	25.0	MPa
Flexural Modulus - 1% Secant	1250	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	80	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	130	°C	ASTM D1525 ¹
Melting Temperature	131	°C	DSC
Heat Deflection Temperature	76	°C	ASTM D648

Note Message
1 .	Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
UNITIKA Nylon 6 A1030SR	UNITIKA Plastics Division	Nylon 6	UNITIKA Nylon 6
Utomer T795A	Shanghai Utomer Material Science Co., Ltd.	TPU-Polyester	Utomer
Badamid® LB70 M30	Bada AG	Nylon 6	Badamid®
PENTAMID B MA 25 H schwarz	PENTAC Polymer GmbH	Nylon 6	PENTAMID B
Hifax TYC 258P C1V301	LyondellBasell Industries	PP Copolymer	Hifax