Order Products : sales@su-jiao.com
Forprene® 6NE001D40
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GQGhzC_Forprene-6NE001D40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Forprene®6NE001D40 is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America, Latin America or Europe. The processing method is: extrusion. Forprene®The main characteristics of 6NE001D40 are: compliance with REACH standards. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 41 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 8.40 | MPa | ASTM D412 |
| Tensile Strength 2 | 17.4 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 680 | % | ASTM D412 |
| Tear Strength 4 | 70.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 56 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Die Temperature | 170 | °C |
| Extrusion instructions |
|---|
| Extrusion Head Temperature: 180°C |
| Note Message | |
|---|---|
| 1 . | Mouth die c |
| 2 . | Mouth die c |
| 3 . | Mouth die c |
| 4 . | C mould |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultra Purge HS | Moulds Plus International USA, Inc. | Proprietary | Ultra Purge |
| AKROMID® B3 GM 15/15 black (1830) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Cheng Yu FR200GV20 | Cheng Yu Plastic Company Limited | Nylon 66 | Cheng Yu |
| Escorene™ Ultra MV 02514 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| Polygen SG8C | Shanghai Polygen Science and Technology Co., Ltd. | PPS | Polygen |
