Order Products : sales@su-jiao.com
DILAMID® 66 GREY 2812
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Dilaplast S.p.A. |
| Trademark: | DILAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GPvb4G_DILAMID-66-GREY-2812.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DILAMID®66 GREY 2812 is a polyamide 66 (nylon 66) material, which contains 16% glass and mineral. This product is available in Europe, and the processing method is injection molding. DILAMID®The main characteristics of 66 GREY 2812 are impact modification. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.55 - 0.75 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 70.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 4.5 | % | ISO 527-2 |
| Flexural Modulus | 4.00 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 7.5 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 150 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 21 | kV/mm | ASTM D149 |
| Comparative Tracking Index | 500 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Ignition Temperature (2.00 mm) | 750 | °C | IEC 60695-2-13 |
| Additional Information |
|---|
| HDT A (1.80 MPa) Unannealed, ISO 75A-1, 2: >150°CComparative Track Index, IEC 60112: >500 V |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 - 100 | °C | |
| Drying Time | 2.0 - 8.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 260 - 300 | °C | |
| Middle Temperature | 270 - 310 | °C | |
| Front Temperature | 280 - 320 | °C | |
| Nozzle Temperature | 270 - 310 | °C | |
| Processing (Melt) Temp | 280 - 320 | °C | |
| Mold Temperature | 70.0 - 110 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1301 P-1 | RTP Company | PPS | RTP |
| RTP 3202 | RTP Company | ETFE | RTP |
| MEGOLON™ HF 8142 NATURAL UV | AlphaGary | TP, Unspecified | MEGOLON™ |
| Boda FF2870 | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| Luran® S 797S | Styrolution | ASA | Luran® S |
