Order Products : sales@su-jiao.com
Infino SC-1220UR
| Category: | PC , Polycarbonate |
| Manufacturer: | SAMSUNG SDI CO., LTD. |
| Trademark: | Infino |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GPcRNb_Infino-SC-1220UR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Infino SC-1220UR is a Polycarbonate (PC) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: good uv resistance. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 20 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 to 0.70 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| R-Scale | 120 | ASTM D785 | |
| R-Scale | 125 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield 1 | 63.0 | MPa | ASTM D638 |
| Yield | 63.0 | MPa | ISO 527-2/50 |
| Flexural Modulus | |||
| -- 2 | 2300 | MPa | ASTM D790 |
| -- 3 | 2260 | MPa | ISO 178 |
| Flexural Strength | |||
| -- 4 | 90.0 | MPa | ASTM D790 |
| -- 5 | 90.0 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed, 4.00 mm) | 125 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 140 | °C | ISO 306/B50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 80.0 | °C | |
| Desiccant Dryer | 80.0 | °C | |
| Drying Time | |||
| -- | 4.0 to 6.0 | hr | |
| Desiccant Dryer | 3.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.040 | % | |
| Rear Temperature | 100 to 260 | °C | |
| Middle Temperature | 270 | °C | |
| Front Temperature | 270 to 280 | °C | |
| Nozzle Temperature | 280 | °C | |
| Mold Temperature | 80.0 to 110 | °C | |
| Injection Pressure | 98.1 | MPa | |
| Back Pressure | 0.981 to 1.96 | MPa | |
| Screw Speed | 30 to 50 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 2.8 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.8 mm/min |
| 5 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymist® XPP 527 | Solvay Specialty Polymers | PTFE | Polymist® |
| Pro PP-HOCC-30GF | Pro Polymers | PP Homopolymer | Pro-Comp™ |
| Sylvin 8874-81C NATURAL | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ExxonMobil™ HDPE HMA 035 | ExxonMobil Chemical | HDPE, UHMW | ExxonMobil™ HDPE |
| Dutral® TER 6235 | Versalis S.p.A. | EPDM | Dutral® |
