Order Products : sales@su-jiao.com
Braskem PP PCD 0140BR
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GOQLrF_Braskem-PP-PCD-0140BR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PCD 0140BR is a low melt flow rate heterophasic copolymer with high impact resistance. This resin was developed for steel pipe coating extrusion. PCD 0140BR is highly protected against thermal ageing, designed for continuous use at high temperature, and UV stabilized. Applications: External three layer extruded polypropylene (topcoating) based coatings for corrosion protection of welded and seamless steel pipes (3LPP). Topcoating and undercoating in thermal insulation coating of steel pipes. Processing: Extrusion |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.915 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.75 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec, Compression Molded) | 66 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 25.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation | ASTM D638, ISO 527-2 | ||
| Yield, Compression Molded | 7.0 | % | |
| Break, Compression Molded | > 400 | % | |
| Flexural Modulus - 1% Secant | |||
| Compression Molded | 1100 | MPa | ASTM D790 |
| Compression Molded | 1300 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 147 | °C | ISO 306/A, ASTM D1525 1 |
| Melting Temperature | 163 | °C | ISO 11357-3, ASTM D3418 |
| Oxidation Induction Time | |||
| 220°C | > 50 | min | ISO 11357-6 |
| 220°C | > 50 | min | ASTM D3895 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 101 FR | RTP Company | PP, Unspecified | RTP |
| Shinko-Lac® ASA U437 | Mitsubishi Rayon America Inc. | ASA | Shinko-Lac® |
| Sylvin 8627-60 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| CALIBRE™ 301-22 | Sumika Styron Polycarbonate Limited | PC | CALIBRE™ |
| Sylvin 5417-85 Natural | Sylvin Technologies Incorporated | TPE | Sylvin |
