Order Products : sales@su-jiao.com

EZ-Brush® Vacuum Bagging Silicone

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	EZ-Brush®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GO6GXm_EZ-Brush-Vacuum-Bagging-Silicone.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EZ-Brush® Vac Bag Silicone is a brushable platinum cure silicone developed especially for making high performance, re-usable vacuum bags. EZ-Brush® Vac Bag Silicone is easy to mix and apply. Mix ratio is 1A:1B by volume and rubber can be applied with a brush or spatula to vertical surfaces without sagging. Pot life is 30 minutes, recoat time is 1 hour. Rubber cures with negligible shrinkage to a soft, flexible rubber (Shore 20A) with very high elongation and tear strength. Newly made bags can be removed from the tool in 3.5 hours and used immediately in production with polyester or epoxy resin systems and will withstand temperatures up to 500° F /260° C. Compared to conventional vacuum bagging systems, EZ-Brush® Vac Bag Silicone is much faster at delivering a production-ready silicone bag resulting in a tremendous time and labor savings. Since bags are re-usable, long term material costs are greatly reduced.

Message

EZ-Brush® Vac Bag Silicone is a brushable platinum cure silicone developed especially for making high performance, re-usable vacuum bags. EZ-Brush® Vac Bag Silicone is easy to mix and apply. Mix ratio is 1A:1B by volume and rubber can be applied with a brush or spatula to vertical surfaces without sagging.

Pot life is 30 minutes, recoat time is 1 hour. Rubber cures with negligible shrinkage to a soft, flexible rubber (Shore 20A) with very high elongation and tear strength. Newly made bags can be removed from the tool in 3.5 hours and used immediately in production with polyester or epoxy resin systems and will withstand temperatures up to 500° F /260° C.

Compared to conventional vacuum bagging systems, EZ-Brush® Vac Bag Silicone is much faster at delivering a production-ready silicone bag resulting in a tremendous time and labor savings. Since bags are re-usable, long term material costs are greatly reduced.

General Information
Features	Good Flexibility Good Tear Strength High Elongation Low Shrinkage Soft
Uses	Bags
Appearance	Green
Processing Method	Vacuum Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.08	g/cm³	ASTM D1475
Specific Volume	0.928	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	1A:1B by volume

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	< 0.10	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	20		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.317	MPa	ASTM D412
Tensile Strength (Break)	3.79	MPa	ASTM D412
Tensile Elongation (Break)	360	%	ASTM D412
Tear Strength ¹	21.0	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Pot Life (23°C)	30	min	ASTM D2471
Thermoset Mix Viscosity	20000	cP	ASTM D2393
Demold Time (23°C)	210	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P3936C	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
RheTech Polypropylene HP514-447UV	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
THERMOLAST® M TM4RST (Series: MC/RS)	KRAIBURG TPE	TPE	THERMOLAST® M
Varcum 29217	Durez Corporation	Phenolic	Varcum
Durethan® BG 30 X XF 000000	LANXESS GmbH	Nylon 6	Durethan®