Tecnoflon® FOR 210

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GNU4ru_Tecnoflon-FOR-210.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 210 is a very low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 210 is mainly intended for blending with other polymers of the Tecnoflon® family to achieve the desired viscosity. Tecnoflon® FOR 210 was developed with a new curing system that improves the physical properties of the finished product. Processing characteristics such as flow and scorch safety are also enhanced. Tecnoflon® FOR 210 is well suited for applications were superior flow, mold release and excellent compression set are required. Some of the basic properties of Tecnoflon® FOR 210 are: Excellent scorch safety Superior mold flow Very good mold release Lack of mold fouling Low compression set Good extrusion behaviour Tecnoflon® FOR 210 can be used for injection and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 210 is a very low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 210 is mainly intended for blending with other polymers of the Tecnoflon® family to achieve the desired viscosity. Tecnoflon® FOR 210 was developed with a new curing system that improves the physical properties of the finished product. Processing characteristics such as flow and scorch safety are also enhanced. Tecnoflon® FOR 210 is well suited for applications were superior flow, mold release and excellent compression set are required.

Some of the basic properties of Tecnoflon® FOR 210 are:

Excellent scorch safety

Superior mold flow

Very good mold release

Lack of mold fouling

Low compression set

Good extrusion behaviour

Tecnoflon® FOR 210 can be used for injection and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Copolymer Good Flow Good Mold Release Low Compression Set Low Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	9	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
WELLAMID Nylon 6600 HWS	CP-Polymer-Technik GmbH & Co. KG	Nylon 66	WELLAMID Nylon
Hostaform® MR130ACS	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®
Lumid® LW4203A(W)	LG Chem Ltd.	Nylon 6+ABS	Lumid®
EXTEM™ XH2315 resin	SABIC Innovative Plastics	PI, TP	EXTEM™
PENTAMID B E10 H natural	PENTAC Polymer GmbH	Nylon 6	PENTAMID B