Order Products : sales@su-jiao.com
Vyncolit® SI 9045T
| Category: | Silicone , Silicone |
| Manufacturer: | Vyncolit N.V. |
| Trademark: | Vyncolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GKoY5S_Vyncolit-SI-9045T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vyncolit SI 9045T is a silicone (Silicone) material containing glass/graphite. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing methods are: resin transfer molding, compression molding or injection molding. The main characteristics of Vyncolit SI 9045T are: impact resistance. Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | ASTM D792 |
| Bulk Factor | 9.0 | ASTM D1895 | |
| Molding Shrinkage - Flow (Transfer Molded) | 0.30 - 0.50 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 5520 | MPa | ASTM D790 |
| Flexural Strength | 55.2 | MPa | ASTM D790 |
| Compressive Strength | 55.2 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 37 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 288 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Middle Temperature | 71.1 - 82.2 | °C | |
| Nozzle Temperature | 82.2 - 93.3 | °C | |
| Processing (Melt) Temp | 93.3 | °C | |
| Mold Temperature | 132 - 154 | °C | |
| Injection Pressure | 41.4 - 82.7 | MPa | |
| Holding Pressure | 20.7 - 41.4 | MPa | |
| Back Pressure | 0.345 | MPa |
| Injection instructions |
|---|
| Cure Time, 0.125 in: 45 secWater Absorption, ASTM D570, 48 hrs, 50°C: 0.5%Bulk Factor, ASTM D1895: 8 to 10Compression and Transfer Molding Conditions: Preheat Temperature: 180 to 200 °F Mold Temperature: 280 to 300 °F Compression Mold Pressure: 2000 to 8000 psi Transfer Mold Pressure: 4000 to 8000 psi Cure Time, 0.125 in: 180 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reny® 4011 | Mitsubishi Engineering-Plastics Corp | PARA | Reny® |
| DeWAL DW 482P | DeWAL Industries | UHMWPE | DeWAL |
| EPLAMID 6 CBR 40 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
| Hostacom TSOP EM5 2639 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Sylvin 6221-83 Orange 5119 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
