Order Products : sales@su-jiao.com
Moplen X30S
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Shazand (Arak) Petrochemical Corporation |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GIw4kU_Moplen-X30S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen X30S is a homo-polymer particularly suited for the extrusion of cast and water quenched blown film. Moplen X30S exhibits excellent process ability and outstanding optical properties. This make Moplen X30S particularly suitable for film for packaging of flowers, books, stationery, blankets, shirts, knitwear, hosiery and food-stuffs such as pasta, snakes, biscuits, bakery products and confectionery. Moplen X30S is also very appropriate for the extrusion of small pipes and drinking straws. Moplen X30S can be used for lamination with polyester, polyamide and aluminum for packaging of snacks, crisps, sweets, coffee, meat products and pre-cooked foods. In these applications, Moplen X30S gives an excellent high gloss finish in laminates and exhibits good printability after corona treatment. * Moplen X30S is suitable for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 93 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 36.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus | 1550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 36 | J/m | ASTM D256 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oven Aging (150°C) | 15.0 | day | ASTM D3012 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 93.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 154 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200.5 A | RTP Company | Nylon 6 | RTP |
| SEQUEL® E3400FR | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| Taitalac® 5000F | Taita Chemical Company, Ltd. | ABS | Taitalac® |
| Iupilon® RS-3001R | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| PERLEX® R221 | A. Schulman Europe | PC | PERLEX® |
