Order Products : sales@su-jiao.com

ISPLEN® PB 186 N4M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GHe7pB_ISPLEN-PB-186-N4M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Isplen® PB 186 N4M is a heterophasic polypropylene copolymer with a superior molecular architecture that combines the impact strength of a conventional block copolymer with the stiffness level of a homopolymer and excellent processability. At the same time, exhibits a higher crystallisation temperature due to controlled chain packaging.

Isplen® PB 186 N4M provides excellent flow properties, very high stiffness and good impact strength.
Outperforms traditional block copolymers with a potential source of cost reduction for finished articles:

It does a potential reduction of wall thickness.

Reduce cooling times: higher mould opening temperatures and shorter cycles.

Can replace mineral filled or blends among polypropylenes.

TYPICAL APPLICATIONS
Isplen® PB 186 N4M is highly suitable to fill moulds with long flow lengths or thin walled articles that demands good dimensional stability together with good impact requirements: packaging, food containers, baskets, garden furniture, leisure goods, flowerpots, toys, storage boxes, trays for fast food, technical items for domestic appliances, automotive, electronic and hardware industries...

General Information
Features	Fast Molding Cycle Food Contact Acceptable Good Dimensional Stability Good Flow Good Impact Resistance Good Processability High Stiffness
Uses	Appliance Components Automotive Applications Electrical/Electronic Applications Food Containers Furniture Packaging Thin-walled Parts Toys
Agency Ratings	EU Food Contact, Unspecified Rating FDA Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	25	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	100		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus (Injection Molded)	1650	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (23°C, Injection Molded)	4.0	kJ/m²	ISO 180
Unnotched Izod Impact Strength (-20°C, Injection Molded)	38	kJ/m²	ISO 180

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	151	°C	ISO 306/A

Resin Grade	Manufacturer	Category	Trademark
Zytel® 151L NC010	DuPont Performance Polymers	Nylon 612	Zytel®
NEXUS Reprocessed PC/ABS RBK	Nexus Resin Group, LLC.	PC+ABS	NEXUS Reprocessed
Celcon® MR25B	Celanese Corporation	Acetal (POM) Copolymer	Celcon®
DOMAMID® 6G30FC	DOMO Engineering Plastics SPA	Nylon 6	DOMAMID®
Lucent PC PC/PBT-FR5	Lucent Polymers, Inc.	PC+PBT	Lucent PC