Order Products : sales@su-jiao.com
TECAFORM® FG Blue
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECAFORM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GGpEQ5_TECAFORM-FG-Blue.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECAFORM® FG Blue is Ensinger's new blue colored acetal designed specifically for the food industry. TECAFORM® is resistant to hot water, and typical cleaning chemicals, and it possesses good bearing and wear properties. Its blue color makes it more visible than standard grades. TECAFORM® is commonly used as bushings, rollers, wear strips and other applications requiring a combination of strength, low moisture absorption, chemical resistance and dimensional stability. TECAFORM® is used in a wide variety of food industry applications requiring good strength and toughness, dimensional stability, wear resistance and the ability to operate in a wet environment with little absorption. Material handling, filling and bottling equipment are some of the common machines utilizing TECAFORM®'s combination of properties. Typical applications are gears, wear strips, bushings, pump parts, fittings and rollers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 23°C, 24 hr | 0.22 | % | ASTM D570 |
| Saturated, 23°C | 0.80 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, 23°C) | 86 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2620 | MPa | ASTM D638 |
| Tensile Strength (Yield, 23°C) | 60.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 25 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2480 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 75.8 | MPa | ASTM D790 |
| Compressive Strength | 31.0 | MPa | ASTM D695 |
| Coefficient of Friction 1(vs. Itself - Dynamic) | 0.21 | ||
| Wear Factor (0.28 MPa, 0.25 m/sec) | 130 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 158 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 110 | °C | ASTM D648 |
| Melting Temperature | 165 | °C | ASTM D2133 |
| CLTE - Flow | 8.5E-5 | cm/cm/°C | ASTM D696 |
| Maximum Service Temperature | |||
| Intermittent | 141 | °C | |
| Long Term | 91 | °C | UL 746B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant 2(23°C, 60 Hz) | 3.70 | ASTM D150 | |
| Dissipation Factor (23°C, 60.0 GHz) | 1.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Note Message | |
|---|---|
| 1 . | 40 psi, 50 fpm |
| 2 . | 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ LDPE PG 7008 (Durables) | The Dow Chemical Company | LDPE | DOW™ LDPE |
| HANWHA LDPE 724 | Hanwha Chemical | LDPE | HANWHA LDPE |
| KMI PP KM-099IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
| Sylvin 6935X06 Grey 9549 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Eastalite™ Copolyester MP007F | Eastman Chemical Company | Copolyester | Eastalite™ |
