Order Products : sales@su-jiao.com
RTP 2700 S-40A Z
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GGDrLM_RTP-2700-S-40A-Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FDA Compliant Ingredients |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 0.689 | MPa | |
| 100% Strain | 0.896 | MPa | |
| 300% Strain | 1.65 | MPa | |
| Tensile Strength (Yield) | 6.21 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 1400 | % | ASTM D412 |
| Tear Strength 1 | 23.6 | kN/m | ASTM D624 |
| Compression Set 2 | ASTM D395B | ||
| 23°C, 22 hr | 14 | % | |
| 70°C, 22 hr | 35 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 182 to 232 | °C | |
| Mold Temperature | 15.6 to 32.2 | °C | |
| Injection Pressure | 27.6 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Generic PC - Glass Fiber, Milled | Generic | PC | Generic |
| HiFill® POM CO GF5 CC | Techmer Engineered Solutions | Acetal (POM) Copolymer | HiFill® |
| KOPA® KN133G15BR | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| Inverko HDRG9901 | Inverko Compounding B.V. | HDPE | Inverko |
| Plenco 06582 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
