Order Products : sales@su-jiao.com
Abstron SE32 FR IS15061
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Bhansali Engineering Polymers Limited |
| Trademark: | Abstron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GEQNzx_AbstronSE32FRIS15061.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Abstron SE32 FR IS15061 is an acrylonitrile butadiene styrene (ABS) product,. It is available in the Asia-Pacific region. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 37.3 | MPa | ASTM D638 |
| Flexural Modulus 2(6.40 mm, Injection Molded) | 1770 | MPa | ASTM D790 |
| Flexural Strength 3(Yield, mm, injection molding) | 58.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 23°C, 3.20mm, injection molding | 290 | J/m | ASTM D256 |
| 23°C, 6.40mm, injection molding | 250 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 4(1.8 MPa, Annealed, 6.40 mm, Injection Molded) | 92.0 | °C | ASTM D648A |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | IS 15061 | ||
| 2.00 mm | < 100 | mm/min | IS 15061 |
| 3.20 mm | < 100 | mm/min | IS 15061 |
| Flame Rating (2.0 mm) | HB | IS 15061 |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | Annealed at 95°C for 2 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premier LS00715 - BO | Premier Polymers, LLC. | LLDPE | Premier |
| Hostacom TKC 285N G22361 | LyondellBasell Industries | PP Copolymer | Hostacom |
| SCHULAMID® 66 GF 30 FC | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Dryflex® SE 85A201 | ELASTO | TPE | Dryflex® |
| SABIC® LLDPE 218B | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
