Order Products : sales@su-jiao.com
Osterlene® PPH-35-.4
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GEMPWr_Osterlene-PPH-35--4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PPH-35-.4 is a low viscosity, highly isotactic, polypropylene homopolymer designed for various injection molded applications such as closures, small appliances, housewares and toys. PPH-35-.4 contains a unique combination of stabilizers, which give it excellent processability with good stiffness, environmental stress crack resistance, heat performance and minimal odor and taste. PPH-35-.4 meets all requirements of the U.S. Food and Drug Administration regulation 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. Specific limitations or conditions of use may apply. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 33.8 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 8.0 | % | ASTM D638 |
| Flexural Modulus | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinelec CCB1834 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | Sinelec |
| Next ABS SX-02ABK | Next Polymers Ltd. | ABS | Next ABS |
| Geon™ HTX Ultra LA436G Black 2880 | PolyOne Corporation | PVC Alloy | Geon™ HTX Ultra |
| INSULCAST® 101 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| Rotuba CAP CP808 (9% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
