Order Products : sales@su-jiao.com
Lucky Enpla LMA1003
| Category: | Acrylic (PMMA) , Polymethyl Methacrylate Acrylic |
| Manufacturer: | Lucky Enpla Co LTD |
| Trademark: | Lucky Enpla |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GDOwvP_Lucky-Enpla-LMA1003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lucky Enpla LMA1003 is a polymethyl methacrylate-acrylic acid product,. It can be processed by extrusion or injection molding and is available in North America, Europe or Asia Pacific. Lucky Enpla LMA1003 applications include electrical/electronic applications, housing and automotive industries. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 2.9 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 49.0 | MPa | ASTM D638 |
| Flexural Modulus 2 | 2450 | MPa | ASTM D790 |
| Flexural Strength 3 | 88.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (6.35 mm) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 84.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 - 90.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 220 - 240 | °C | |
| Middle Temperature | 220 - 240 | °C | |
| Front Temperature | 230 - 250 | °C | |
| Nozzle Temperature | 230 - 250 | °C | |
| Mold Temperature | 60.0 - 80.0 | °C | |
| Back Pressure | 1.96 - 3.92 | MPa | |
| Screw Speed | 60 - 80 | rpm |
| Injection instructions |
|---|
| Resin Temperature: 220-240°CInjection Pressure (1st Pressure): 700-1200 kg/cm²Injection Pressure (2nd Pressure): 400-800 kg/cm² |
| Note Message | |
|---|---|
| 1 . | 30 mm/min |
| 2 . | 30 mm/min |
| 3 . | 30 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2900-80 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| NOVACARB NC-8384LM BK | NOVA Polymers, Inc. | PC+ABS | NOVACARB |
| LUVOCOM® 1-7532 VP | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| ExxonMobil™ HDPE HTA 001HD5 | ExxonMobil Chemical | HDPE, HMW | ExxonMobil™ HDPE |
| OTECH PVC OC6014-Boot | OTECH Corporation | PVC, Unspecified | OTECH PVC |
