Order Products : sales@su-jiao.com
apinat® DP2091
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | API SpA |
| Trademark: | apinat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GDDPGl_apinat-DP2091.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apinat®DP2091 is a biodegradable polymer (Biodeg Polymers) product,. It is available in Europe. The main features are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 17.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 54 | % | ASTM D638 |
| Flexural Modulus | 720 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 100 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 160 | °C | |
| Middle Temperature | 165 - 175 | °C | |
| Front Temperature | 175 - 185 | °C | |
| Nozzle Temperature | 190 - 200 | °C | |
| Mold Temperature | 25.0 - 40.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium/Low |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 170 | °C | |
| Cylinder Zone 3 Temp. | 170 - 180 | °C | |
| Cylinder Zone 4 Temp. | 180 - 190 | °C | |
| Cylinder Zone 5 Temp. | 175 - 185 | °C |
| Extrusion instructions |
|---|
| L/D ratio: 24:1Compression Screw Ratio: 2.3:1Screw Speed: 50 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex GC-0700 H | SAMSUNG SDI CO., LTD. | ABS+PET | Starex |
| Ultraform® W 2320 003 BK120 Q600 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| UBESTA 3035 LU1 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| Generic Epoxy - Silver | Generic | Epoxy | Generic |
| RTP 199 X 143684 C | RTP Company | PP, Unspecified | RTP |
