Order Products : sales@su-jiao.com
Qenos PE GM5049B
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Qenos PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GCbv77_Qenos-PE-GM5049B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GM5049B is a black high molecular weight High Density Polyethylene. It is a high performance resin for use in pressure pipes where service life to 50 years is required. GM5049B offers a balance of excellent processing characteristics along with outstanding toughness, chemical resistance and environment stress crack resistance. GM5049B will also provide excellent resistance to the effects of Ultra-Violet light exposure in outdoor applications. GM5049B has been designed for extrusion into a full range of pipe and fitting sizes, where High Density, PE 100 Type resins are required. GM5049B is suitable for use in the transport of a wide range of fluids for industrial, rural and mining applications, including potable water. Suitability for use in any application should be determined by appropriate performance testing. GM5049B has been designed to meet the requirements for PE 100 Type compounds and has been accepted by Australasian Polyolefine Pipeline Systems Inc. as meeting AS/NZS 4131:1997 and is intended to be used in pipes conforming to AS/NZS 4130. The material does not comply with clause 8. of AS/NZS 4131:1997 in that the long-term hydrostatic strength at 50°C has not been determined. It does comply in full with draft standard AS/NZS4131 (draft 1999). GM5049B is suitable for food contact applications and conforms to the requirements of AS2070. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.045 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 6.1 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| -- | 855 | MPa | ASTM D638 |
| 2% secant | 840 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 24.0 | MPa | ASTM D638 |
| Fracture | 31.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 855 | MPa | ASTM D790 |
| Additional Information |
|---|
| Oxidative Induction Time, ISO/TR 10837, 210°C: >20 minPipe Properties:5.5 MPa Pressure, 80°C, AS 4131: >165 hr5.0 MPa Pressure, 80°C, AS 4131: >1000 hr12.4 MPa Pressure, 20°C, ISO 4427/4437: >100 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 55S5202 | The Matrixx Group, Inc. | PC | Matrixx |
| Stanyl® TE341 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Andur 80-5 AP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Emulprene® 1502CR | INSA | SBR, Emulsion | Emulprene® |
| Novalloy-B B5524 | PlastxWorld Inc. | ABS+PBT | Novalloy-B |
