Order Products : sales@su-jiao.com
Elastocon® 8038N
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GCOhNV_Elastocon-8038N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastocon® 8038N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8038N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8038N can be overmolded to polypropylene. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.28 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 3.38 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 620 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 143 - 160 | °C | |
| Front Temperature | 160 - 182 | °C | |
| Nozzle Temperature | 188 - 204 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.0 | °C | |
| Cylinder Zone 1 Temp. | 191 - 232 | °C | |
| Cylinder Zone 2 Temp. | 191 - 232 | °C | |
| Cylinder Zone 3 Temp. | 191 - 232 | °C | |
| Cylinder Zone 4 Temp. | 191 - 232 | °C | |
| Cylinder Zone 5 Temp. | 191 - 232 | °C | |
| Die Temperature | 191 - 232 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-80/10 NAT | Techmer Engineered Solutions | Acetal (POM) Copolymer | TES |
| ExxonMobil™ LDPE LD 143.26 | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| Edgetek™ CY3000 AS BK | PolyOne Corporation | PC Alloy | Edgetek™ |
| LNP™ LUBRICOMP™ REL22 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
| DAI-EL™ LT-304 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
