Order Products : sales@su-jiao.com
Ebalta AH 120 / TGS
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GC8vrf_Ebalta-AH-120-TGS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Applications
Properties
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore D) | 84 to 88 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 3000 to 3200 | MPa | ISO 178 |
| Flexural Stress | 105 to 125 | MPa | ISO 178 |
| Compressive Stress | 90.0 to 110 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 36 to 46 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 88.0 to 94.0 | °C | ISO 75-2/B |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 22 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Post Cure Time | |||
| 60°C | 6.0 to 8.0 | hr | |
| 90°C | 3.0 to 5.0 | hr |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 1.10 to 1.14 | g/cm³ | |
| Viscosity (25°C) | 0.60 to 0.80 | Pa·s | |
| Curing Time (20°C) | 6.0 to 8.0 | hr | |
| Pot Life 1(20°C) | 20 to 25 | min |
| Note Message | |
|---|---|
| 1 . | 200 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultraform® N 2640 E2 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Geon™ Vinyl Flexible G92C | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Elastron® G G500.A40.B.ABS | Elastron USA, Inc. | SEBS | Elastron® G |
| Kepamid® 2340M7 | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| ULTEM™ HU1004 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
