Order Products : sales@su-jiao.com
AlphaSeal™ 04-073 P MODIFIED
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | AlphaSeal™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GBSLlh_AlphaSeal-04-073-P-MODIFIED.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A TPE COMPOUND RECOMMENDED FOR MOLDING WINE CORKS. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.868 to 0.908 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 54 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 73 to 79 | ||
| Shore A, 15 sec | 68 to 74 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 1.91 mm) | 8.27 | MPa | ASTM D412 |
| Tensile Elongation 2(Break, 1.91 mm) | 600 | % | ASTM D412 |
| Compression Set (23°C, 22 hr) | 16 to 26 | % | ASTM D395 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefabloc® TP SD 300 60A | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| Utomer UT860D | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyester | Utomer |
| GAPEX® RPP20EU61BK | Ferro Corporation | PP, Unspecified | GAPEX® |
| Sylvin 83008-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ESTOPLAST EP 4030GY27 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
