Order Products : sales@su-jiao.com
Precision Polymer V76E
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Precision Polymer Engineering Ltd. |
| Trademark: | Precision Polymer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GAqSRA_Precision-Polymer-V76E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ETP polymer. This peroxide cured compound is based on a tetrapolymer of Ethylene, Tetrafluoroethylene (TFE) and Perfluoromethylvinylether (PMVE), and a cure site monomer - 70-80 °IRHD. This compound offers a higher level of fluid resistance than that of fluoroelastomers. It is not totally perfluorinated, so will not exhibit the ultra-low volume swell associated with Perlast® perfluoroelastomers. It is particularly suited to applications which have contact with strong amines, bases, steam and polar solvents. It improves on the chemical resistance of Aflas® and FKM elastomers, while retaining excellent low temperature performance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| IRHD Hardness | 75 | ASTM D1415, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 18.4 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 180 | % | ASTM D412, ISO 37 |
| Compression Set (200°C, 24 hr) | 20 | % | ASTM D395, ISO 815 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | 206 | °C |
| Additional Information |
|---|
| Minimum Operating Temperature: -20°C (-4°F) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® B3GM35 Q611 | BASF Corporation | Nylon 6 | Ultramid® |
| Daicel PP PNAS2 (Type A) | Daicel Polymer Ltd. | PP, Unspecified | Daicel PP |
| Jampilen RP310M | Jam Polypropylene Company | PP Random Copolymer | Jampilen |
| Plexiglas® LED 8N LD96 | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
| ALCOM® PA66 910/1.1 CF15 GF20 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
