Order Products : sales@su-jiao.com
KRATON® D1153 E
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GAP35r_KRATON-D1153-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1153 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical forms identified below in the grade nomenclature:
Kraton D1153 ES is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 2781 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.0 | g/10 min | ISO 1133 |
| Solution Viscosity 1 | 1400 to 1900 | mPa·s | Internal Method |
| Bound Styrene | 28.5 to 30.5 | % | Internal Method |
| Antioxidant Additive | > 0.10 | % | Internal Method |
| Ash Content - ES | 0.10 to 0.40 | % | ISO 247 |
| Molecular Weight - Triblock | 123000 | g/mol | |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Triblock Content | 95 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.90 | MPa | ISO 37 |
| Tensile Stress (Yield) | 28.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 800 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Toluene, 25%w at 25°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 15 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Unichem 6000 | Colorite Polymers | PVC, Unspecified | Unichem |
| Andur 7500 DP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Ecollent™ PC/ABS-406E | Lucent Polymers, Inc. | PC+ABS | Ecollent™ |
| OP - PC - Unfilled 20 | Oxford Polymers | PC | OP - PC - Unfilled |
