Order Products : sales@su-jiao.com
Toppyl SP 2103 C
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Toppyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G9O3Ob_Toppyl-SP-2103-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Toppyl SP 2103 C is a barefoot seal peel solution developed for the cast and blown film technology. This product has been designed to offer a peelable seal to PP substrates and is suitable for sterilisable applications. Toppyl SP 2103 C is a solution created to replace completely the sealing layer in a coextruded film. It provides a constant easy-opening force over a wide sealing temperature window and is readily processable on conventional equipment in both mono and co-extruded structures. EU and FDA compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - 2% Secant, MD | 260 | MPa | ASTM D882 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 15.0 | MPa | ASTM D882 |
| Fracture | 33.0 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 790 | % | ASTM D882 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 107 | °C | ISO 306/A50 |
| Additional Information |
|---|
| Recommended processing temperatures: 185°C to 265°C. In cases were higher temperatures are required please contact your appropriate technical contact for support. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ DC-818.G001-8000 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| SHIN-A SEV-0102M70 | SHIN-A T&C | Epoxy | SHIN-A |
| Lupoy® GP5056F | LG Chem Ltd. | PC+ABS | Lupoy® |
| LUVOCOM® 1/TF/18/SI/2/BK | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| LEXAN™ 943A resin | SABIC Innovative Plastics | PC | LEXAN™ |
