Order Products : sales@su-jiao.com
CONTINUUM鈩?DMDD-6620 HEALTH+鈩?Datasheet
| Category: | HDPE , Bimodal Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | CONTINUUM™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G9Civo_CONTINUUM-DMDD-6620-HEALTH-Datasheet.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products.
Complies with:
Additive Antiblock:No Slip: No Processing Aid: Yes |
| General Information | |
|---|---|
| Additive |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.956 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.28 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 27 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 10% Igepal, F50 | 220 | hr | ASTM D1693 |
| 50°C, 100% Igepal, F50 | > 1100 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 24.8 | MPa | ASTM D638 |
| Fracture | 29.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 3.7 | % | ASTM D638 |
| Fracture | 800 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 1170 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 131 | °C | ASTM D1525 |
| Additional Information |
|---|
| 根据 ASTM D 4976 进行模塑和测试。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 124789 D | RTP Company | PLA | RTP |
| TKC ABS | TKC Kunststoffe e.K. | ABS | TKC |
| Nipol® AR 51 | Zeon Corporation | Rubber | Nipol® AR |
| Alcryn® 3065 NC | Advanced Polymer Alloys | MPR | Alcryn® |
| Ferro PP LPP40BD05WH | Ferro Corporation | PP Homopolymer | Ferro PP |
