Order Products : sales@su-jiao.com
ALCUDIA® HDPE M5305
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G8gqDO_ALCUDIA-HDPE-M5305.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® M5305 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of monofilaments with high tensile strength at break. TYPICAL APPLICATIONS ALCUDIA®M5305 gives high tenacity and flexible monofilaments with low fibrillation tendency suitable for:
Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.52 | g/10 min | ISO 1133 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 230 | °C |
| Extrusion instructions |
|---|
| Stretching Ratio: 8 to 11 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 5145-90 CLEAR YELLOW 4112 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| AKROMID® B3 GF 35 1 natural (2465) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Exelene® PP C1204 | Montachem International, Inc. | PP Impact Copolymer | Exelene® PP |
| Ketjenflex® 2 | Axcentive SARL | Plasticizer | Ketjenflex® |
| PENTAMID B GV40 H RC schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
