| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Azdel, Inc. |
| Trademark: | SuperLite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G8aVcd_SuperLite-SL550700-100-3-0mm-.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| AZDEL SuperLite SL550700-100 (3.0mm) is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the application (i.e.; adhesive films, barrier films, scrim, tough PP films, non-wovens, reinforcements or just the bare surface.) Typically used in non-structural applications where a very high strength to weight ratio is required, such as automotive headliners, door panels, package shelves, and other interior trim. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.279 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | < 0.020 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1500 | MPa | ASTM D638 |
| Tensile Strength | 12.0 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| 23°C, Energy at Peak Load | 1.80 | J | ASTM D3763 |
| 23°C, Total Energy | 4.60 | J | ASTM D3763 |
| Additional Information |
|---|
| Multi-axial Impact Peak Force, ASTM D3763, 23°C: 500 NMass per unit area, Internal Test Method: 700 g/m²Flexual Strength, SAE J949: 7.5 MPaFlexual Modulus, SAE J949: 900 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T-27 GF 35 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Zytel® RS LC1000 BK385 | DuPont Performance Polymers | Nylon 1010 | Zytel® RS |
| Geon™ Vinyl Wire & Cable WR3790BL | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Wire & Cable |
| LITEN RL 58 | UNIPETROL RPA | PE Copolymer | LITEN |
| ULTEM™ 4000 resin | SABIC Innovative Plastics | PEI | ULTEM™ |