Order Products : sales@su-jiao.com
Ingeo™ 7001D
| Category: | PLA , Polylactic Acid |
| Manufacturer: | NatureWorks® LLC |
| Trademark: | Ingeo™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G7bWTc_Ingeo-7001D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ingeo biopolymer 7001D, a NatureWorks LLC product, is a thermoplastic resin derived from annually renewable resources and is specifically designed for use in injection stretch blow molded (ISBM) bottle applications. Ingeo biopolymer 7001D can be run using conventional ISBM equipment, but processes at lower temperatures than PET and can attain good resolution of mold detail on conventional tooling. Applications Injection stretch blow molded (ISBM) bottles for single- or two- stage operations. Potential applications for Ingeo 7001D include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.50 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Carbon Dioxide Transmission Rate | 2850 | cm³/m²/24 hr | Internal method |
| Oxygen Transmission Rate | 680 | cm³/m²/24 hr | ASTM D1434 |
| Water Vapor Transmission Rate | 380 | g/m²/24 hr | ASTM F1249 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 55.0 - 60.0 | °C | ASTM D3418 |
| Peak Crystallization Temperature (DSC) | 145 - 160 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 - 85.0 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Suggested Max Moisture | < 0.010 | % | |
| Rear Temperature | 179 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 210 - 221 | °C | |
| Nozzle Temperature | 210 - 221 | °C | |
| Processing (Melt) Temp | 199 - 221 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Back Pressure | 0.689 - 1.38 | MPa |
| Injection instructions |
|---|
| General Blow Molding:Preform Temperature: 176 to 212°FStretch Rod Speed: 1.2 to 2 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-3954-70 | Teknor Apex Company | TPE | Telcar® |
| Altuglas® V 920T | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| Estane® 58246 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| Geon™ Vinyl Fittings 210A (HS) | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Fittings |
| EMPILON® HN60 | EMPILON | SEBS | EMPILON® |
