Order Products : sales@su-jiao.com
Sumitomo DAP FS-10-VO-200-P
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G79qS8_Sumitomo-DAP-FS-10-VO-200-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FS-10-VO-200-P is a short glass fiber reinforced, flame retardant, diallyl meta-phthalate molding compound, which meets the requirements of ASTM D5948 Type SIG-F. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.91 | g/cm³ | ASTM D792 |
| Apparent Density | 0.80 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.25 | % | ASTM D570 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability | ASTM D229 | ||
| Burning | 50.0 | sec | |
| Ignition | 130.0 | sec |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 76.0 | MPa | ASTM D638 |
| Flexural Modulus | 12000 | MPa | ASTM D790 |
| Flexural Strength | 131 | MPa | ASTM D790 |
| Compressive Strength | 152 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | > 260 | °C | ASTM D648 |
| CLTE - Flow | 1.8E-5 | cm/cm/°C | ASTM E831 |
| RTI Elec | 200 | °C | UL 746 |
| RTI Imp | 200 | °C | UL 746 |
| RTI Str | 200 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 15 | kV/mm | ASTM D149 |
| Dielectric Constant 2 | ASTM D150 | ||
| 1 kHz | 4.10 | ||
| 1 MHz | 3.90 | ||
| Dissipation Factor 3 | ASTM D150 | ||
| 1 kHz | 0.011 | ||
| 1 MHz | 0.016 | ||
| Arc Resistance | 175 | sec | ASTM D495 |
| Comparative Tracking Index | > 600 | V | ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | ||
| 3.20 mm | V-0 | ||
| Oxygen Index | 50 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | 60 Hz, Wet |
| 2 . | Wet |
| 3 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Techsil IS808 | Techsil Limited | Silicone | Techsil |
| XAREC™ S123 | Idemitsu Kosan Co., Ltd. | SPS | XAREC™ |
| NYLOY® NG-1020NM | Nytex Composites Co., Ltd. | Nylon 6 | NYLOY® |
| Grilon® BR 40 | EMS-GRIVORY | Nylon 6 | Grilon® |
| CYCOLOY™ RCX7243 resin | SABIC Innovative Plastics Asia Pacific | PC | CYCOLOY™ |
