Order Products : sales@su-jiao.com
DENILUB N 00U 0Mo
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G6yhls_DENILUB-N-00U-0Mo.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA 6 unfilled with molybdenum disulfide. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 2.0 | % | |
| Across Flow | 2.0 | % | |
| Water Absorption (Saturation) | 2.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3300 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 75.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.11 | ||
| Static | 0.18 | ||
| Wear Factor 1 | 105 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 4.5 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | No Break | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 65.0 | °C | ASTM D648A |
| Vicat Softening Temperature | 200 | °C | ASTM D1525 2 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| 2 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marvel™ M70 | SCG Chemicals Co., Ltd. | PE, Unspecified | Marvel™ |
| TPV Elastoprene® N73A-E | ELASTORSA Elastomeros Riojanos S.A. | PP+EPDM | TPV Elastoprene® |
| TRIREX® Compound NH3025NP | Samyang Corporation | PC | TRIREX® Compound |
| Elastollan® C85A55 | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyester | Elastollan® |
| PENTAMID A GV30 H natur | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
