Order Products : sales@su-jiao.com
TAFMER™ P-0680
| Category: | PAO , Polyalphaolefin |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | TAFMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G6GIVg_TAFMER-P-0680.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TAFMER™P-0680 is a polyα-olefin (PAO) material,. This product is available in North America,. TAFMER™Typical application areas of P-0680 are: food contact applications |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.870 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength | 48 | kV/mm | ASTM D149 |
| Dielectric Constant | 2.30 | ASTM D150 | |
| Dissipation Factor | 2.0E-4 | ASTM D150 |
| Additional Information |
|---|
| Tensile Strength @ Break, JIS K 6301: 50 kgf/cm²Elongation @ Break, JIS K 6301: 950%Surface Hardness, JIS K 6301, A Scale: 63 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® R210 LW | Ravago Group | Nylon 66 | Ravamid® |
| TechnoPet 3410 | TechnoCompound GmbH | PET | TechnoPet |
| NEXT REGRIND PET 545-300RG | NEXT Specialty Resins, Inc. | PET | NEXT REGRIND |
| ADEKA EP-4003S | Adeka Corporation | Epoxy | ADEKA |
| DIOSHY® VP-850 | DIOSHY Co.,Ltd. | TPV | DIOSHY® |
