Order Products : sales@su-jiao.com
Petrothene® LR590001
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G5KOLw_Petrothene-LR590001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PETROTHENE LR590001 is designed as primary insulation for telephone singles. LR590001 is a high density resin designed for low shrinkback after extrusion. Antioxidant has been added to ensure thermal stability during processing. The resin also contains a metal deactivator to prevent degradation from copper while the cable is in service. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F0) | 48.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 21.7 | MPa | |
| Break, Compression Molded | 16.2 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 590 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+18 | ohms·cm | ASTM D991 |
| Dielectric Constant (1 MHz) | 2.33 | ASTM D1531 | |
| Dissipation Factor (1 MHz) | 7.0E-5 | ASTM D1531 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 to 163 | °C | |
| Cylinder Zone 2 Temp. | 177 to 204 | °C | |
| Cylinder Zone 3 Temp. | 204 to 232 | °C | |
| Cylinder Zone 4 Temp. | 246 to 260 | °C | |
| Adapter Temperature | 246 to 260 | °C | |
| Melt Temperature | 246 to 260 | °C | |
| Die Temperature | 246 to 260 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ HDPE 82054T | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Dryflex® A3 500450 | ELASTO | SEBS | Dryflex® |
| GPPC PS-302 | GPPC Chemical Co., Ltd. | PS (HIPS) | GPPC |
| EPLAMID 6 IMP V0 NC B001 | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
| Ultramid® Structure A3WG8 LFX BK23215 | BASF Corporation | Nylon 66 | Ultramid® |
