Order Products : sales@su-jiao.com
Generic PAI
| Category: | PAI , Polyamide-imide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G4krQA_Generic-PAI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PAI This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 to 1.46 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.30 to 0.40 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 69 to 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 3810 to 6930 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 0.80 to 15 | % | ASTM D638 |
| Flexural Modulus (23°C) | 4140 to 6980 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 238 to 241 | MPa | ASTM D790 |
| Compressive Modulus | 2410 to 4100 | MPa | ASTM D695 |
| Compressive Strength (23°C) | 163 to 222 | MPa | ASTM D695 |
| Coefficient of Friction | 0.030 to 0.35 | ASTM D1894 | |
| Wear Factor | 1.4 to 2000 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 42 to 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 278 to 279 | °C | ASTM D648 |
| Thermal Conductivity (23°C) | 0.26 to 0.55 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 6.0E+6 to 5.0E+18 | ohms | ASTM D257 |
| Dielectric Constant (23°C) | 3.90 to 6.00 | ASTM D150 | |
| Dissipation Factor (23°C) | 8.7E-3 to 0.032 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ LDPE 780E | The Dow Chemical Company | LDPE | DOW™ LDPE |
| DILAMID® 66 FVT 30 BLACK | Dilaplast S.p.A. | Nylon 66 | DILAMID® |
| Fluon® PTFE PA3540LT | Asahi Glass Co., Ltd. | PTFE | Fluon® |
| Elastocon® CLR65 | Elastocon TPE Technologies | TPE | Elastocon® |
| Sumiliteresin® PR-51587 I | SBHPP | Phenolic | Sumiliteresin® |
