Category: | PC , Polycarbonate |
Manufacturer: | DESCO Co., Ltd. |
Trademark: | DESLOY™ |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | G3gOiN_DESLOY-DSC901G2.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Descriptions: DESLOY™ DSC901G2 is PC(Polycarbonate) Glass Fiber 10% filled reinforced resin. It has good electrical property and weatherability. Applications: DESLOY™ DSC901G2 is applied to Electronic & Electrical Parts which request good electrical property and dimensional stability. |
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
Uses |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow | 0.50 - 0.70 | % | |
Water Absorption (23°C, 24 hr) | 0.20 | % | ASTM D570 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength | 61.8 | MPa | ASTM D638 |
Tensile Elongation (Break) | 100 | % | ASTM D638 |
Flexural Modulus | 2450 | MPa | ASTM D790 |
Flexural Strength | 95.1 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact | 690 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deflection Temperature Under Load | ASTM D648 | ||
0.45 MPa, not annealed | 130 | °C | ASTM D648 |
1.8 MPa, not annealed | 115 | °C | ASTM D648 |
Flammability | Nominal Value | Test Method | |
---|---|---|---|
Flame Rating | V-0 | UL 94 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 100 - 120 | °C | |
Drying Time | 3.0 - 5.0 | hr | |
Suggested Max Moisture | < 0.20 | % | |
Rear Temperature | 275 - 280 | °C | |
Middle Temperature | 280 - 290 | °C | |
Front Temperature | 280 - 290 | °C | |
Nozzle Temperature | 280 - 290 | °C | |
Processing (Melt) Temp | 280 - 290 | °C | |
Mold Temperature | 60.0 - 90.0 | °C |
Injection instructions |
---|
Speed: 40 to 70%Pressure 1st: 30 to 60%Pressure 2nd: 30 to 60Holding Pressure: 10 to 20% |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
PROTEQ™ C35UST4L | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
RTP 980.7 | RTP Company | PSU | RTP |
Ultraform® N 2320 0035 LEV | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
Bergadur™ PB40 MI20 GR003 | PolyOne Corporation | PBT | Bergadur™ |
Rotuba CAP CP801 (9% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |