Order Products : sales@su-jiao.com
Sumitomo DAP FS-5
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G35bUX_Sumitomo-DAP-FS-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FS-5 is a short glass fiber reinforced, non-flame retardant, diallyl meta-phthalate molding compound, which meets the requirements of ASTM D5948 Type SIG |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.91 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (Compression Molded) | 0.20 to 0.40 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.35 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Compression Molded) | 69.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 11700 | MPa | ASTM D790 |
| Flexural Strength (Compression Molded) | 110 | MPa | ASTM D790 |
| Compressive Strength | 131 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | > 260 | °C | ASTM D648 |
| CLTE - Flow | 1.8E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.36 | W/m/K | ASTM C177 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant 1 | ASTM D2520 | ||
| 1 kHz | 3.90 | ||
| 1 MHz | 3.70 | ||
| Dissipation Factor 2 | ASTM D150 | ||
| 1 kHz | 0.011 | ||
| 1 MHz | 0.014 | ||
| Arc Resistance | 175 | sec | ASTM D495 |
| Comparative Tracking Index | > 600 | V | IEC 60112, ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 29 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 201 TFE 15 SI 2 | RTP Company | Nylon 66 | RTP |
| Cleapact TI-300 | DIC Corporation | SBC | Cleapact |
| ELASTOSIL® LR 3015/70 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Sylvin 5145-75 Black 261 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| APEX® S-96-A0914N-90 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | APEX® |
